Maxi-Cosi FERO - ANNEXE 7 Uživatelský manuál stáhnout pdf (Strana 35)

Section 1. GENERAL DESCRIPTION AND TECHNICAL DATA 35

1.3 Arm identification data

On the MIDA TOOL EYE MANUAL arm, in a protected position, there is an identification plate showing the arm

MODEL and SERIAL No. The plate (A) is visible when the cover (B) is pulled back (Figure 1-2).

Given the importance of this plate, always observe the following instructions:

a. never remove the plate from the original position selected by the manufacturer;

b. do not change or falsify the technical data shown;

c. do not clean the plate with inappropriate items (e.g.: iron brushes), as this may ruin the data shown.

Figure 1-2. MIDA TOOL EYE MANUAL arm identification plate.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 133 134

Žádné komentáře

Maxi-Cosi FERO - ANNEXE 7 Uživatelský manuál Strana 35